1. Starting pressure :0-6Bar(Adjustable)
2. Stopping Pressure:2-10Bar(Adjustable)
3. Min Differential Pressure: 1Bar (between starting and stopping pressure)
4. Max Differential Current: 7 Bar (between starting and stopping pressure)
5. Max Rated Current: 10A
6. Max Working Pressure: 10 Bar
7. Rated Voltage: 100V-120V or 220V-240V
8. Frequency: 50/60Hz
9. Max Ambient Temperature: 60℃
10. Protection Degree: IP65
1. Multi-function photoelectric pressure controller used in water systems.
2. stopping the pump automatically when water shortage (dry-running protection)
3. Can manual select the Running Model (Model 1 and Model 2)
4. Restart the pump automatically after idling stop, standard detect interval is 1time/hour.
5. Built-in with two Running models (Model 1 and Model 2), can manually select the Running model as per requirements
6. Threaded connection: G1” Male
Model 1, you can set stopping pressure and starting pressure:
when the pressure reaches pre-setted stopping pressure, or reach maximum pressure of the pump (no water flow), this pump control will turn off the pump;
When the pressure decreasing and reach the starting pressure value, this pump control will turn on the pump.
Model 2, you only could set the starting pressure:
When the flow stop (tap closed), the pressure will reach the max. pressure of pump and the pump control will turn off the pump.
When the pressure decrease and reach the starting pressure value, the pump control will turn on the pump.